Leak stop in syringe 30 ml (1A14) View larger

Leak stop in syringe 30 ml (1A14)

B07.01.001.0004

New

The leak stop is the most common system to repair the leaks in A/C systems. It quickly seals the leaks in the rubber components and it is very simple to use. It could be used also for a preventative maintenance. The innovative syringe format allow an even more easy application of this product. For usage information see below at More Info

More details

More info

The leak stop is the most common system to repair the leaks in A/C systems. It quickly seals the leaks in the rubber components and it is very simple to use. It could be used also for a preventative maintenance. The innovative syringe format allow an even more easy application of this product.

1) Recover the refrigerant gas from the A/C system;

2) Vacuum the system for 5 minutes;

3) If you cannot reach -0,25 bar and hold above -0,23 bar, there may be a single hole too large to be repaired;

4) Disconnect from A/C systems the low pressure hose of the charging station;

5) Connect the hose of the leak stop to the syringe and connect it to the low pressure service valve on the A/C system. Press the syringe until the contained liquid has been transferred to the A/C system, then disconnect;

6) Recharge the A/C system following the manufacturer indications;

7) Start the engine and the A/C system at least 20 minutes, allowing the leak stop to circulate and work.

Data sheet

PARTLeak stops

Reviews

No customer comments for the moment.

Write a review

Leak stop in syringe 30 ml (1A14)

Leak stop in syringe 30 ml (1A14)

The leak stop is the most common system to repair the leaks in A/C systems. It quickly seals the leaks in the rubber components and it is very simple to use. It could be used also for a preventative maintenance. The innovative syringe format allow an even more easy application of this product. For usage information see below at More Info

Write a review